Windows
Add a network printer in Windows 11
At the end the network printer is set up in Windows 11, selected as the default printer and confirmed with a test page. The steps apply to Windows 11 version 26H2 and equally to version 25H2.
- Platform
- Windows
- Applies to
- Windows 11 version 26H2 (build 26300), identical procedure under 25H2. Version 24H2 has received no further updates for Home and Pro since 13.10.2026, only Enterprise and Education are still serviced.
- Time needed
- approx. 15 Min.
- Level
- Beginner
What you need
- The printer is switched on and sits on the same network as the PC. On Wi-Fi it must be the same network name (SSID).
- The printer name from your IT team, plus the IP address or the share path of the printer.
- Admin rights, meaning an account with administrative permission. For creating a port by IP address and for printers from a print server, Windows normally asks you to sign in as an administrator. Clarify this with your IT team beforehand.
- On company devices the printer may already be deployed centrally. Check the list of installed printers first.
-
Step 1: Check your Windows version
Press the Windows key together with the R key, type «winver» and confirm with the Enter key. A small window shows the version and build of your system.
If it says version 26H2 or 25H2, the steps below apply. On version 24H2 the procedure is the same, but Home and Pro no longer receive updates. Speak to your IT team in that case.
- Open winver (click here)
Simplified sketch, the actual screen may look slightly different. -
Step 2: Open Settings
StartSettings
Click on «Start» and then on «Settings». Alternatively, press the Windows key together with the I key.
-
Step 3: Go to the printer page
SettingsBluetooth & devicesPrinters & scanners
Click on «Bluetooth & devices» in the left column and then on «Printers & scanners». You now see the list of all printers set up on this PC.
Note: Microsoft's documentation writes «Bluetooth & devices». Depending on the version, the interface may show the wording slightly differently. It is the same page.
- Bluetooth & devices
Simplified sketch, the actual screen may look slightly different. -
Step 4: Check whether the printer is already there
Look through the list for the printer name your IT team gave you. If it is already listed, skip steps 5 to 7 and continue with the default printer.
-
Step 5: Check the protected print mode
On the «Printers & scanners» page, scroll down to the «Printer preferences» section and check whether «Windows protected print mode» is active.
If it is active, you can only set up printers that work with the Windows printer driver. Printers that need a manufacturer's driver cannot be installed.
Note: Do not switch the mode on by yourself. When it is set up, Windows removes printers that already run on third party drivers. In companies the mode is often enforced by policy. Talk to your IT team first.
-
Step 6: Start the search for the printer
At the top, in the «Add a printer or scanner» area, click on the «Add device» button.
Windows now searches the network for a few seconds. Leave the window open until the list of results appears.
- Add a printer or scanner
- Microsoft Print to PDF
- Microsoft XPS Document Writer
Simplified sketch, the actual screen may look slightly different. -
Step 7: Take over the printer that was found
Click on «Add device» next to the printer you want. Windows sets the printer up and then shows it in the list.
In some cases Windows adds the printer straight away, without you having to click the button a second time.
Note: If the printer appears in the list of results, you can skip step 8 and continue directly with the default printer.
-
Step 8: Add the printer by IP address
If your printer is not found, the line «The printer that I want isn't listed» appears after a few seconds. Click the button next to it, «Add manually».
The «Add Printer» window opens with a list of methods. Select «Add a printer using an IP address or hostname» and click on «Next».
Under «Device Type», select the entry «TCP/IP Device». Under «Hostname or IP address», enter the address your IT team gave you. Windows fills in the «Port name» field automatically, leave it unchanged.
Leave the «Query the printer and automatically select the driver to use» tick box selected and click on «Next». Windows now looks for the device and a matching driver. Then confirm the suggested printer name and finish the wizard.
Note: Windows normally asks for admin rights on this route. If the printer sits on a print server, select «Select a shared printer by name» instead and enter the share path your IT team gave you. Here too, Windows has asked for administrator credentials since update KB5005652.
- Device Type
- Device Type TCP/IP Device
- Hostname or IP address address from your IT team (click here)
- Query the printer and automatically select the driver to use
Simplified sketch, the actual screen may look slightly different. -
Step 9: Switch off the automatic default
SettingsBluetooth & devicesPrinters & scannersPrinter preferences
Go back to the «Printers & scanners» page and scroll down to the «Printer preferences» section.
Switch «Let Windows manage my default printer» off. Otherwise Windows keeps setting the printer you used last as the default.
- Printer preferences
- Let Windows manage my default printer (click here)
Simplified sketch, the actual screen may look slightly different. -
Step 10: Set the printer as the default
Click on your new printer in the list. At the top of the window, click on «Set as default».
The printer then carries the «Default» marking.
- Printer name from your IT team
Simplified sketch, the actual screen may look slightly different. -
Step 11: Print a test page
Printers & scannersPrinter namePrinter propertiesGeneralPrint Test Page
On the same page, click on «Printer properties». A window with several tabs opens.
Select the «General» tab and click on «Print Test Page». The sheet should come out of the device within a few seconds.
Simplified sketch, the actual screen may look slightly different. -
Step 12: Check the driver situation
SettingsWindows Update
Open «Windows Update» in Settings and check whether updates are available for your system. On most devices Windows prints with its own driver, without additional software.
Since 15 January 2026, no new third party printer drivers are published on Windows Update, and existing drivers are only updated in individual cases. Since 1 July 2026, Windows prefers its own driver («Windows Ready Print») when selecting a driver. You obtain special drivers from the manufacturer or through your IT team.
Note: If you need features such as finishers, cost centres or follow me print, the supplied standard driver is often not enough. Contact your IT team for this.
Frequently asked questions
The printer does not appear in the list of results. What can I do?
Usually the PC and the printer are on different networks, for example the guest network, or the printer is in standby. On Wi-Fi, check that both devices use the same network name. Add the printer by IP address (step 8). You can read the IP address off the printer display or off its network configuration page.
The printer worked, and after a few days nothing happens. Why?
Often the printer has been given a new IP address by the network. The port you created then points nowhere. Ask your IT team to give the printer a fixed address or a reservation on the network.
Why does Windows ask for an administrator account during setup?
For a new port by IP address and for printers from a print server, Windows has required administrator rights by default since update KB5005652. A standard account is therefore asked for administrator credentials. In that case, have your IT team set up or deploy the printer.
What is «Windows protected print mode»?
The mode only allows printers that work with the Windows driver («Windows Ready Print»). When it is set up, Windows removes existing printers that use third party drivers. Additional features of such devices can disappear as well. You find the entry under «Bluetooth & devices», «Printers & scanners», section «Printer preferences», with the buttons «Set up» and «Turn off». By default the mode is not active. Only change it after speaking to your IT team, as you give up security features when you turn it off.
What is the difference between «Printing preferences» and «Printer properties»?
Under «Printing preferences» you set paper size, duplex and colour for your print jobs. Under «Printer properties» you find the device, the port and the button for the test page. The «Printer preferences» section in the Settings app is a third thing again and applies to all printers.
Stuck on a step?
Start a remote support session and we will take a look at your screen together with you.
Sources
- Microsoft Support: Hinzufügen oder Installieren eines Druckers in Windows
- Microsoft Support: Fix shared printer connection problems in Windows
- Microsoft Support: Set a default printer in Windows
- Microsoft Learn: Windows geschützter Druckmodus
- Microsoft Learn: End of servicing plan for third-party printer drivers on Windows
- Microsoft Windows IT Pro Blog: Introducing Windows Ready Print and Modernized Driver Selection
- Microsoft Support: KB5005652, Treiberinstallation per Point and Print
- Microsoft Learn: Windows 11 release information
- Microsoft Learn: Windows 11, version 24H2 known issues and notifications
This guide was drafted automatically by our editorial assistant from the manufacturer documentation listed above. The sketches are simplified. Spotted a mistake? Let us know at info@guycolle.com.
More guides
Microsoft 365 · 45 Min.
Reset OneDrive on the Mac and set it up again
Unlink OneDrive from your Microsoft 365 account, reset it with the script from Microsoft, clear out old folders and aliases and set up sync…
iPhone & iPad · 60 Min.
Transfer data to a new iPhone with Quick Start
Move apps, photos, mail accounts and settings straight from your current iPhone to the new one, without a computer and without a restore fr…
Mac · 25 Min.
Set up Time Machine on an external SSD and restore a file
Set up an external SSD as an encrypted Time Machine destination, choose the backup frequency and bring back a single deleted file from the …